OXWELD 1515 Series
Natural gas or propane one-piece. Long preheat flames.
Features
- Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle
- One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf
- Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames
- Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle
- One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf
- Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames
- Long, parallel preheat passages – permit re-dressing nozzle without affecting performance
- One-piece nozzle is a single piece of solid copper – provides maximum cooling – recommended always for acetylene, and for other fuel gases when heat exposure is unusually severe
- Two-piece nozzles – recommended for high efficiency with fuel gases other than acetylene – solid copper, heavy-wall external sleeve and brass internal sections can be ordered separately to minimize replacement cost
- Conical seats – instant aligning provides tight seal, prevents leaks around nozzle nut
Industries
- Industrial and General Fabrication
- Structural Steel Fabrication
- Repair and Maintenance
- Light Fabrication
Gas Tips Fuel Data
Gas Pressure - Cutting Oxygen | 20-25 psig |
Gas Pressure - Preheat Oxygen | 20-50 psig |
Gas Pressure - Propane/NatGas | 3-5 psig |
Part Number | 08Z85 |
Total Acetylene Consumption | 5-8 cfh |
Total Oxygen Consumption | 55-60 cfh |
Gas Pressure - Cutting Oxygen | 30-35 psig |
Gas Pressure - Preheat Oxygen | 20-50 psig |
Gas Pressure - Propane/NatGas | 3-5 psig |
Part Number | 08Z85 |
Total Acetylene Consumption | 5-8 cfh |
Total Oxygen Consumption | 70-80 cfh |
Gas Pressure - Cutting Oxygen | 30-35 psig |
Gas Pressure - Preheat Oxygen | 20-50 psig |
Gas Pressure - Propane/NatGas | 3-5 psig |
Part Number | 08Z86 |
Total Acetylene Consumption | 8-12 cfh |
Total Oxygen Consumption | 135-155 cfh |
Gas Pressure - Cutting Oxygen | 35-40 psig |
Gas Pressure - Preheat Oxygen | 20-50 psig |
Gas Pressure - Propane/NatGas | 3-5 psig |
Part Number | 08Z86 |
Total Acetylene Consumption | 8-12 cfh |
Total Oxygen Consumption | 150-165 cfh |
Gas Pressure - Cutting Oxygen | 40-45 psig |
Gas Pressure - Preheat Oxygen | 20-50 psig |
Gas Pressure - Propane/NatGas | 3-5 psig |
Part Number | 08Z86 |
Total Acetylene Consumption | 8-12 cfh |
Total Oxygen Consumption | 160-210 cfh |
Gas Pressure - Cutting Oxygen | 25-30 psig |
Gas Pressure - Preheat Oxygen | 25-55 psig |
Gas Pressure - Propane/NatGas | 3-5 psig |
Part Number | 08Z87 |
Total Acetylene Consumption | 8-12 cfh |
Total Oxygen Consumption | 215-245 cfh |
Gas Pressure - Cutting Oxygen | 30-35 psig |
Gas Pressure - Preheat Oxygen | 25-55 psig |
Gas Pressure - Propane/NatGas | 5-10 psig |
Part Number | 08Z87 |
Total Acetylene Consumption | 12-18 cfh |
Total Oxygen Consumption | 235-290 cfh |
Gas Pressure - Cutting Oxygen | 35-40 psig |
Gas Pressure - Preheat Oxygen | 25-55 psig |
Gas Pressure - Propane/NatGas | 5-10 psig |
Part Number | 08Z87 |
Total Acetylene Consumption | 12-18 cfh |
Total Oxygen Consumption | 270-320 cfh |
Gas Pressure - Cutting Oxygen | 25-35 psig |
Gas Pressure - Preheat Oxygen | 25-55 psig |
Gas Pressure - Propane/NatGas | 5-10 psig |
Part Number | 08Z88 |
Total Acetylene Consumption | 12-18 cfh |
Total Oxygen Consumption | 325-410 cfh |
Gas Pressure - Cutting Oxygen | 35-45 psig |
Gas Pressure - Preheat Oxygen | 25-55 psig |
Gas Pressure - Propane/NatGas | 5-10 psig |
Part Number | 08Z88 |
Total Acetylene Consumption | 12-18 cfh |
Total Oxygen Consumption | 410-480 cfh |
Gas Pressure - Cutting Oxygen | 55-65 psig |
Gas Pressure - Preheat Oxygen | 30-60 psig |
Gas Pressure - Propane/NatGas | 5-10 psig |
Part Number | 08Z88 |
Total Acetylene Consumption | 18-20 cfh |
Total Oxygen Consumption | 580-670 cfh |
Gas Pressure - Cutting Oxygen | 40-50 psig |
Gas Pressure - Preheat Oxygen | 30-60 psig |
Gas Pressure - Propane/NatGas | 10-15 psig |
Part Number | 08Z89 |
Total Acetylene Consumption | 20-23 cfh |
Total Oxygen Consumption | 680-805 cfh |
Gas Pressure - Cutting Oxygen | 55-65 psig |
Gas Pressure - Preheat Oxygen | 30-60 psig |
Gas Pressure - Propane/NatGas | 10-15 psig |
Part Number | 08Z89 |
Total Acetylene Consumption | 22-28 cfh |
Total Oxygen Consumption | 845-975 cfh |
Gas Pressure - Cutting Oxygen | 60-70 psig |
Gas Pressure - Preheat Oxygen | 40-70 psig |
Gas Pressure - Propane/NatGas | 20-25 psig |
Part Number | 65Z12 |
Total Acetylene Consumption | 35-40 cfh |
Total Oxygen Consumption | 1,490-1,600 cfh |
Gas Pressure - Cutting Oxygen | 50-60 psig |
Gas Pressure - Preheat Oxygen | 60-90 psig |
Gas Pressure - Propane/NatGas | 22-26 psig |
Part Number | 65Z13 |
Total Acetylene Consumption | 40-45 cfh |
Total Oxygen Consumption | 1,640-1,900 cfh |
Operating Specifications
Average Kerf Width | .050 in. |
Cutting Speed | 18-24 in./min |
Metal Thickness | 1/4 in. |
Part Number | 08Z85 |
Tip Size | 1/2 in. |
Average Kerf Width | .065 in. |
Cutting Speed | 18-24 in./min |
Metal Thickness | 1/2 in. |
Part Number | 08Z85 |
Tip Size | 1/2 in. |
Average Kerf Width | .080 in. |
Cutting Speed | 12-20 in./min |
Metal Thickness | 3/4 in. |
Part Number | 08Z86 |
Tip Size | 1-1/2 in. |
Average Kerf Width | .090 in. |
Cutting Speed | 11-17 in./min |
Metal Thickness | 1 in. |
Part Number | 08Z86 |
Tip Size | 1-1/2 in. |
Average Kerf Width | .095 in. |
Cutting Speed | 10-15 in./min |
Metal Thickness | 1-1/2 in. |
Part Number | 08Z86 |
Tip Size | 1-1/2 in. |
Average Kerf Width | .100 in. |
Cutting Speed | 9-13 in./min |
Metal Thickness | 2 in. |
Part Number | 08Z87 |
Tip Size | 4 in. |
Average Kerf Width | .105 in. |
Cutting Speed | 7-10 in./min |
Metal Thickness | 3 in. |
Part Number | 08Z87 |
Tip Size | 4 in. |
Average Kerf Width | .115 in. |
Cutting Speed | 6-9 in./min |
Metal Thickness | 4 in. |
Part Number | 08Z87 |
Tip Size | 4 in. |
Average Kerf Width | .125 in. |
Cutting Speed | 5-7 in./min |
Metal Thickness | 5 in. |
Part Number | 08Z88 |
Tip Size | 8 in. |
Average Kerf Width | .170 in. |
Cutting Speed | 4-6 in./min |
Metal Thickness | 6 in. |
Part Number | 08Z88 |
Tip Size | 8 in. |
Average Kerf Width | .187 in. |
Cutting Speed | 3.5-4.5 in./min |
Metal Thickness | 8 in. |
Part Number | 08Z88 |
Tip Size | 8 in. |
Average Kerf Width | .21 in. |
Cutting Speed | 2.5-3.5 in./min |
Metal Thickness | 10 in. |
Part Number | 08Z89 |
Tip Size | 12 in. |
Average Kerf Width | .24 in. |
Cutting Speed | 2-3 in./min |
Metal Thickness | 12 in. |
Part Number | 08Z89 |
Tip Size | 12 in. |
Average Kerf Width | .30 in. |
Cutting Speed | 2-3 in./min |
Metal Thickness | 16 in. |
Part Number | 65Z12 |
Tip Size | 16 in. |
Average Kerf Width | .34 in. |
Cutting Speed | 1.5-2 in./min |
Metal Thickness | 18 in. |
Part Number | 65Z13 |
Tip Size | 18 in. |
Gas Tips
Cleaning Drill Size Cutting | 60 |
Cleaning Drill Size Preheat | 67 |
Metal Thickness | 1/8-1/2 in. |
Preheat Holes | 8 |
Tip Size | 1/2 in. |
Cleaning Drill Size Cutting | 53 |
Cleaning Drill Size Preheat | 64 |
Metal Thickness | 3/4 - 1-1/2 in. |
Preheat Holes | 8 |
Tip Size | 1-1/2 in. |
Cleaning Drill Size Cutting | 46 |
Cleaning Drill Size Preheat | 42 |
Metal Thickness | 2-4 in. |
Preheat Holes | 8 |
Tip Size | 4 in. |
Cleaning Drill Size Cutting | 39 |
Cleaning Drill Size Preheat | 59 |
Metal Thickness | 4-8 in. |
Preheat Holes | 8 |
Tip Size | 8 in. |
Cleaning Drill Size Cutting | 31 |
Cleaning Drill Size Preheat | 56 |
Metal Thickness | 8-12 in. |
Preheat Holes | 8 |
Tip Size | 12 in. |
Cleaning Drill Size Cutting | 20 |
Cleaning Drill Size Preheat | 54 |
Metal Thickness | 12-16 in. |
Preheat Holes | 12 |
Tip Size | 16 in. |
Cleaning Drill Size Cutting | 15 |
Cleaning Drill Size Preheat | 53 |
Metal Thickness | 16-18 in. |
Preheat Holes | 12 |
Tip Size | 18 in. |
Cleaning Drill Size Cutting | 8 |
Cleaning Drill Size Preheat | 52 |
Metal Thickness | 18-20 in. |
Preheat Holes | 12 |
Tip Size | 20 in. |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.