308/308L is used for MIG/MAG welding, and is suitable for joining stainless steels of the 18Cr/8Ni/ELC and 18Cr/8Ni/Nb types for service temperatures up to 350°C (660 F). 308/308L is approved by TÜV-Rheinland for use at cryogenic temperatures down to 4°K (-269°C).
Typical Tensile Properties
|Condition||As Welded||As Welded|
|Tensile Strength||440 MPa||610 MPa|
|Yield Strength||290 MPa||460 MPa|
|Elongation||25 %||38 %|
|Current||Deposition Rate||Diameter||Voltage||Wire Feed Speed|
|150-260 A||0.0-0.0 kg/h||1.2 mm||24-29 V||0.0-0.0 m/min|
|60-220 A||0.0-0.0 kg/h||1.0 mm||15-28 V||0.0-0.0 m/min|
|40-120 A||0.0-0.0 kg/h||0.8 mm||15-19 V||0.0-0.0 m/min|
|230-350 A||0.0-0.0 kg/h||1.6 mm||25-30 V||0.0-0.0 m/min|
EN ISO 14343-A : G 19 9 L
SFA/AWS A5.9 : ER308L
Werkstoffnummer : 1.4316
|Approvals are based on factory location. Please contact ESAB for more information.|
|Alloy Type||Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C|
How to purchase Exaton 308/308L
We're as eager to put ESAB gear in your hands as you are to have it. That's why we sell our products with distributors who'll give you the attention, support, and value you deserve. Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.
To make things even easier, we've developed the online shopping list below. As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet. And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.