ESAB

CORE-BRIGHT 316L

The following items have been added to your list


x

Welds types 316, 316L and 318 steels. Contain 2-2.5% molybdenum to increase the corrosion resistance to pitting induced by sulfuric and sulfurous acids, sulphites, chloride, and cellulose solutions. Used extensively in the rayon, dye, and paper industries.

BUY NOW


Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded42 %600 MPa (87 ksi)430 MPa (62 ksi)

Deposition Data

Current Deposition Rate Deposition Type Diameter Deposition Efficiency (%) TTW Dist. Voltage Wire Feed Speed
110 A 2.6 kg/h (5.8 lb/h) Spray Transfer 1.2 mm (.045 in.) 86 % 19 mm (3/4 in.) 26 V 762 cm/min (300 in./min)
150 A 3.67 kg/h (8.1 lb/h) Spray Transfer 1.2 mm (.045 in.) 86 % 19 mm (3/4 in.) 27 V 1016 cm/min (400 in./min)
180 A 4.45 kg/h (9.8 lb/h) Spray Transfer 1.2 mm (.045 in.) 87 % 19 mm (3/4 in.) 27 V 1270 cm/min (500 in./min)
250 A 3.8 kg/h (8.4 lb/h) Spray Transfer 2.4 mm (3/32 in.) 85 % 25.4 mm (1 in.) 26 V 284 cm/min (112 in./min)
250 A 4.5 kg/h (10.0 lb/h) Spray Transfer 2.4 mm (3/32 in.) 89 % 38 mm (1-1/2 in.) 26 V 338 cm/min (133 in./min)
300 A 4.6 kg/h (10.2 lb/h) Spray Transfer 2.4 mm (3/32 in.) 85 % 25.4 mm (1 in.) 28 V 345 cm/min (136 in./min)
300 A 6.1 kg/h (13.5 lb/h) Spray Transfer 2.4 mm (3/32 in.) 89 % 38 mm (1-1/2 in.) 28 V 402 cm/min (178 in./min)
350 A 6.3 kg/h (13.9 lb/h) Spray Transfer 2.4 mm (3/32 in.) 88 % 25.4 mm (1 in.) 29 V 467 cm/min (184 in./min)
350 A 7.8 kg/h (17.1 lb/h) Spray Transfer 2.4 mm (3/32 in.) 87 % 38 mm (1-1/2 in.) 29 V 577 cm/min (227 in./min)
400 A 7.3 kg/h (16.2 lb/h) Spray Transfer 2.4 mm (3/32 in.) 85 % 25.4 mm (1 in.) 30 V 561 cm/min (221 in./min)
400 A 10.3 kg/h (22.7 lb/h) Spray Transfer 2.4 mm (3/32 in.) 87 % 38 mm (1-1/2 in.) 30 V 767 cm/min (302 in./min)
450 A 9.3 kg/h (20.6 lb/h) Spray Transfer 2.4 mm (3/32 in.) 85 % 25.4 mm (1 in.) 30 V 693 cm/min (273 in./min)
450 A 11.7 kg/h (25.9 lb/h) Spray Transfer 2.4 mm (3/32 in.) 87 % 38 mm (1-1/2 in.) 30 V 871 cm/min (343 in./min)
210 A 3.2 kg/h (7.1 lb/h) Spray Transfer 2.0 mm (5/64 in.) 86 % 19 mm (3/4 in.) 24 V 348 cm/min (137 in./min)
250 A 4.3 kg/h (9.5 lb/h) Spray Transfer 2.0 mm (5/64 in.) 87 % 19 mm (3/4 in.) 26 V 460 cm/min (181 in./min)
300 A 5.4 kg/h (12.0 lb/h) Spray Transfer 2.0 mm (5/64 in.) 85 % 19 mm (3/4 in.) 27 V 599 cm/min (236 in./min)

Classifications

Grade E316LT0-3
Name AWS A5.22

Approvals

Approvals ASME SFA 5.22
AWS A5.22 E316LTO-3
CERTIFIED BY C.W.B.- AWS A5.22
Approvals are based on factory location. Please contact ESAB for more information.

Typical Weld Metal Analysis %

C Cr Ferrite Mn Mo Ni Si
0.03 % 19.70 % 7 FN % 1.30 % 2.20 % 12.50 % 0.70 %
x

Part Numbers and Accessories

Part Numbers : CORE-BRIGHT 316L
251933305 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..