Coreshield 6
Coreshield 6 is a high productivity, high deposition gasless flux cored wire. This self-shielded wire is ideal for single or multiple pass weld applications in addition to providing high deposition rates, low spatter, and good penetration. Because of its stiffer weld puddle, Coreshield 6 offers exceptional multi-pass weld stacking characteristics, produces excellent bead appearance and X-ray quality weld deposits. Coreshield 6 is run DCEP (electrode positive).
Industries
- Bridge Construction
- Civil Construction
- Ship/Barge Building
Welding Process
- FCAW (Flux Core)
Typical Charpy V-Notch Properties
As Welded | |
Impact Value | 31 ft-lb |
Impact Value | 42 J |
Testing Temperature | -20 °F |
Testing Temperature | -29 °C |
Typical Tensile Properties
Condition | Elongation | Tensile Strength | Yield Strength |
As Welded | 26 % | 590 MPa (85 ksi) | 465 MPa (67 ksi) |
Recommended Welding Parameters
Current | TTW Dist. | Voltage | Wire Diameter | Wire Feed Speed |
275-390 A | 25.4 mm (1 in.) | 23-25 V | 2.0 mm (5/64 in.) | 381-762 cm/min (150-300 in./min) |
265-615 A | 38 mm (1.5 in.) | 22-27 V | 2.4 mm (3/32 in.) | 254-1016 cm/min (100-400 in./min) |
Deposition Data
Current | Deposition Rate | Diameter | Deposition Efficiency (%) | Electrical Stickout | Voltage | Wire Feed Speed |
265 A | 2.9 kg/h (6.1 lb/h) | 2.4 mm (3/32 in.) | 78.7 % | 25.4 mm | 22 V | 254 cm/min (100 in./min) |
365 A | 4.2 kg/h (9.3 lb/h) | 2.4 mm (3/32 in.) | 79.8 % | 25.4 mm | 23 V | 381 cm/min (150 in./min) |
415 A | 5.6 kg/h (12.5 lb/h) | 2.4 mm (3/32 in.) | 80.9 % | 25.4 mm | 23 V | 508 cm/min (200 in./min) |
530 A | 8.5 kg/h (19.0 lb/h) | 2.4 mm (3/32 in.) | 81.8 % | 25.4 mm | 26 V | 762 cm/min (300 in./min) |
615 A | 11.6 kg/h (25.8 lb/h) | 2.4 mm (3/32 in.) | 81.8 % | 25.4 mm | 29 V | 1016 cm/min (400 in./min) |
275 A | 2.8 kg/h (6.2 lb/h) | 2.0 mm (5/64 in.) | 78.1 % | 25.4 mm | 23 V | 381 cm/min (150 in./min) |
300 A | 3.4 kg/h (7.4 lb/h) | 2.0 mm (5/64 in.) | 78.8 % | 25.4 mm | 23 V | 457 cm/min (180 in./min) |
325 A | 3.8 kg/h (8.3 lb/h) | 2.0 mm (5/64 in.) | 79.6 % | 25.4 mm | 23.5 V | 508 cm/min (200 in./min) |
350 A | 4.5 kg/h (10.0 lb/h) | 2.0 mm (5/64 in.) | 80.1 % | 25.4 mm | 24 V | 610 cm/min (240 in./min) |
380 A | 5.3 kg/h (11.7 lb/h) | 2.0 mm (5/64 in.) | 80.1 % | 25.4 mm | 24.5 V | 711 cm/min (280 in./min) |
390 A | 5.7 kg/h (12.5 lb/h) | 2.0 mm (5/64 in.) | 80.3 % | 25.4 mm | 25 V | 762 cm/min (300 in./min) |
Classifications
Classifications |
ASME SFA 5.36 : ASME SFA 5.20 : 5/64 in. (2.0 mm) - AWS A5.20 : E70T-6-D H8 3/32 in. (2.4 mm) - AWS A5.20 : E70T-6 5/64 in. (2.0 mm) - AWS A5.36 : E70T6-A2-CS3-D H8 3/32 in. (2.4 mm) - AWS A5.36 : E70T6-A2-CS3 |
Approvals
Society | Seismic Certified "D" |
Approvals are based on factory location. Please contact ESAB for more information. |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
Al | C | Mn | Ni | P | S | Si | ||||||||
0.60 % | 0.08 % | 1.26 % | 0.40 % | 0.013 % | 0.005 % | 0.13 % | ||||||||
0.008 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.