Dual Shield 9000-C1
Dual Shield 9000-C1 is an all-position flux cored electrode which produces a 2.5% Ni deposit. The analysis is very similar to the Dual Shield T-90C1 except that this product has out-of-position capability. Dual Shield 9000-C1 is used for welding of 2-3% Ni steels and castings used in applications requiring good toughness at subzero temperatures. Shielding gas 100% CO2 and 75% Ar - Remainder CO2 may be used.
Industries
- Process
- Ship and Offshore Yards
Welding Process
- FCAW (Flux Core)
Typical Charpy V-Notch Properties
Impact Value | Testing Temperature | |||
as welded 100% co2 | ||||
52 J(38 ft-lb) | -18 degC(0 degF) | |||
41 J(30 ft-lb) | -40 degC(-40 degF) | |||
as welded 75% ar - 25% co2 | ||||
45 J(33 ft-lb) | -40 degC(-40 degF) |
Typical Tensile Properties
Condition | As Welded | As Welded |
Shielding Gas | 75% Ar - 25% CO2 | 100% CO2 |
Tensile Strength | 680 MPa(98 ksi) | 665 MPa(96 ksi) |
Yield Strength | 610 MPa(89 ksi) | 580 MPa(85 ksi) |
Elongation | 24 % | 25 % |
Deposition Data
Current | Deposition Rate | Diameter | Deposition Efficiency (%) | Voltage | Wire Feed Speed |
75% Ar - 25% CO2 | |||||
150 A | 1.91 kg/h(4.2 lb/h) | 1.2 mm(.045 in.) | 86 % | 28 V | 508 cm/min(200 in./min) |
210 A | 86 kg/h(6.3 lb/h) | 1.2 mm(.045 in.) | 86 % | 29 V | 762 cm/min(300 in./min) |
250 A | 3.86 kg/h(8.5 lb/h) | 1.2 mm(.045 in.) | 87 % | 30 V | 1016 cm/min(400 in./min) |
290 A | 4.85 kg/h(10.7 lb/h) | 1.2 mm(.045 in.) | 87 % | 33 V | 1270 cm/min(500 in./min) |
330 A | 5.76 kg/h(12.7 lb/h) | 1.2 mm(.045 in.) | 87 % | 34 V | 1524 cm/min(600 in./min) |
155 A | 2 kg/h(4.4 lb/h) | 1.4 mm(.052 in.) | 87 % | 25 V | 381 cm/min(150 in./min) |
245 A | 3.31 kg/h(7.3 lb/h) | 1.4 mm(.052 in.) | 86 % | 28 V | 635 cm/min(250 in./min) |
310 A | 4.63 kg/h(10.2 lb/h) | 1.4 mm(.052 in.) | 85 % | 33 V | 889 cm/min(350 in./min) |
360 A | 6.03 kg/h(13.3 lb/h) | 1.4 mm(.052 in.) | 85 % | 36 V | 1143 cm/min(450 in./min) |
430 A | 7.98 kg/h(17.6 lb/h) | 1.4 mm(.052 in.) | 87 % | 37 V | 1524 cm/min(600 in./min) |
190 A | 2.77 kg/h(6.1 lb/h) | 1.6 mm(1/16 in.) | 87 % | 27 V | 38 cm/min(150 in./min) |
300 A | 4.63 kg/h(10.2 lb/h) | 1.6 mm(1/16 in.) | 87 % | 30 V | 35 cm/min(250 in./min) |
365 A | 5.58 kg/h(12.3 lb/h) | 1.6 mm(1/16 in.) | 86 % | 33 V | 762 cm/min(300 in./min) |
410 A | 6.35 kg/h(14 lb/h) | 1.6 mm(1/16 in.) | 88 % | 33 V | 889 cm/min(350 in./min) |
450 A | 7.3 kg/h(16 lb/h) | 1.6 mm(1/16 in.) | 87 % | 33 V | 1016 cm/min(400 in./min) |
500 A | 9.11 kg/h(20.1 lb/h) | 1.6 mm(1/16 in.) | 87 % | 39 V | 1270 cm/min(500 in./min) |
Classifications
Classifications |
ASME SFA 5.36 : ASME SFA 5.29 : AWS A5.36 : E91T1-M21A4-Ni2 AWS A5.36 : E91T1-C1A4-Ni2 AWS A5.29 : E91T1-Ni2C/E91T1-Ni2M |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | Mn | Ni | P | S | Si | |||||||||
100% CO2 | ||||||||||||||
0.07 % | 1.20 % | 2.50 % | 0.013 % | 0.010 % | 0.50 % | |||||||||
75% Ar - 25% CO2 | ||||||||||||||
0.08 % | 1.50 % | 2.60 % | 0.014 % | 0.011 % | 0.70 % |
How to purchase Dual Shield 9000-C1
We're as eager to put ESAB gear in your hands as you are to have it. That's why we sell our products with distributors who'll give you the attention, support, and value you deserve. Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.
To make things even easier, we've developed the online shopping list below. As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet. And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.